Pictures show

Hydrogen flame analyzer for gas logging during petroleum exploration. C1-C5 can be rapidly analyzed in 30 seconds and the total hydrocarbon can be detected continuously.

*Realtime display TG/CHR

*Eqiup functions such as collecting、controlling、storage、printing、communication etc

*Export：TCP/UDP/RS232

*Used in various types of mudlogging unit

*Low maintenance cost

• *Working Condition
• Supply voltage: single phase voltage: 220V ± 10%;
• Frequency: 50 ±1 HZ
• Power: 1000 w
• Ambient temperature: 0 ~ 40 ℃
• Relative humidity: 40 ~ 90 ℃
• *Total natural gas detection:
• Measuring principle: FID
• Measurement: continuous
• Minimum detection concentration: 10PPM
• Grade: first gear
• Baseline drift: <0.5mV
• Noise: <0.5 mV
• Repeatability error: <±5.0%
• * Detection of natural gas components:
• Measuring principle: FID
• Measurement method: period
• Detection cycle: 30 seconds (30~90 seconds adjustable)
• Minimum detection concentration: 10PPM
• Detection range: 10PPM -- 100%
• Grade: first gear
• Separation degree: 1%C1 and 1%C2 are greater than 0.9
• Baseline drift: <0.5mV
• Noise: <0.5 mV
• Repeatability error: <±5.0%